Professional IC Distribution & Technical Solutions

The AK204 is a high-performance, low-noise operational amplifier (op-amp) manufactured by Asahi Kasei Microdevices (AKM). Below are the factual specifications, descriptions, and features of the AK204:

Specifications:

• Supply Voltage Range: ±2.25V to ±18V (Dual Supply), 4.5V to 36V (Single Supply)
• Input Offset Voltage: 0.5mV (Typical), 2.5mV (Maximum)
• Input Bias Current: 10nA (Typical)
• Input Offset Current: 1nA (Typical)
• Gain Bandwidth Product (GBW): 10MHz (Typical)
• Slew Rate: 5V/µs (Typical)
• Common Mode Rejection Ratio (CMRR): 100dB (Typical)
• Power Supply Rejection Ratio (PSRR): 100dB (Typical)
• Operating Temperature Range: -40°C to +85°C
• Package Type: 8-pin DIP, SOIC

Descriptions:

• The AK204 is a precision, low-noise operational amplifier designed for high-accuracy signal processing applications.
• It features low input offset voltage and bias current, making it suitable for instrumentation and sensor signal conditioning.
• The device operates over a wide supply voltage range, supporting both single and dual power supply configurations.

Features:

• Low Noise: 8nV/√Hz (Typical) at 1kHz
• Low Distortion: Suitable for audio and precision measurement applications.
• High Output Drive: Capable of driving low-impedance loads.
• Wide Bandwidth: 10MHz GBW ensures stable performance in high-frequency applications.
• Robust Design: High CMRR and PSRR minimize errors from power supply fluctuations.

These specifications and features make the AK204 suitable for applications such as medical instrumentation, audio processing, and industrial control systems.

(Note: Always refer to the official AKM datasheet for the most accurate and updated information.)