Professional IC Distribution & Technical Solutions

The STC11F08XE-35I is a microcontroller manufactured by STC Micro. Below are its specifications, descriptions, and features:

Specifications:

• Core: 8051 (Enhanced 1T architecture)
• Operating Frequency: Up to 35 MHz
• Flash Memory: 8 KB (for program storage)
• RAM: 512 bytes
• EEPROM: None (but supports IAP for data storage in Flash)
• Timers:
• 2 × 16-bit timers (Timer 0 & Timer 1)
• 1 × Watchdog Timer
• GPIO Pins: Up to 23 I/O pins (depending on package)
• ADC: None
• Communication Interfaces:
• UART (Serial Port)
• SPI (via software)
• I²C (via software)
• Operating Voltage: 3.3V – 5.5V
• Power Consumption: Low-power modes supported
• Package: LQFP-44 / PDIP-40 (varies by variant)
• Operating Temperature: -40°C to +85°C

Descriptions:

• The STC11F08XE-35I is a high-performance 1T 8051-based microcontroller, meaning it executes most instructions in a single clock cycle, significantly improving speed over traditional 12-clock 8051 MCUs.
• It is designed for cost-sensitive applications requiring moderate processing power and low power consumption.
• Suitable for industrial control, home appliances, and embedded systems.

Features:

• High-Speed 1T Core: Faster execution than standard 8051 MCUs.
• In-System Programming (ISP): Allows firmware updates via UART.
• In-Application Programming (IAP): Enables Flash memory to store data.
• Enhanced EMI Resistance: Better noise immunity.
• Multiple Power-Saving Modes: Idle and Power-Down modes for reduced consumption.
• Built-in Watchdog Timer: Improves system reliability.
• Wide Voltage Range: Supports 3.3V to 5.5V operation.

This microcontroller is commonly used in applications requiring moderate processing power, low cost, and reliability.