Professional IC Distribution & Technical Solutions

Global leader in semiconductor components distribution and technical support services, empowering your product innovation and industry advancement

Product Catalog Contact Us
Home > WINBOND > W25X20CLSNIG

W25X20CLSNIG Specifications

Detailed technical information and Application Scenarios

Product Details

PartNumberManufactorQuantityAvailability
W25X20CLSNIGWINBOND33068Yes

W25X20CLSNIG** is a **2M-bit Serial Flash Memory** manufactured by **Winbond**.

The W25X20CLSNIG is a 2M-bit Serial Flash Memory manufactured by Winbond.

Specifications:

  • Memory Size: 2M-bit (256K x 8)
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.7V – 3.6V
  • Speed:
  • Up to 104 MHz clock frequency
  • Supports Standard/Dual/Quad SPI modes
  • Sector Erase: 4KB sectors
  • Block Erase: 32KB or 64KB blocks
  • Chip Erase: Full memory erase
  • Page Program: Up to 256 bytes per page
  • Write Protection: Software & hardware protection
  • Endurance: 100,000 program/erase cycles per sector
  • Data Retention: 20 years
  • Package: 8-pin SOIC (150mil)
  • Operating Temperature: -40°C to +85°C

Descriptions & Features:

  • High-Performance SPI Flash for embedded systems
  • Low Power Consumption with deep power-down mode
  • Flexible Erase & Program Capabilities (sector, block, or full chip)
  • Security Features:
  • Unique 64-bit ID for device identification
  • Write protection via software (status register) or hardware (WP# pin)
  • Reliable & Durable:
  • ECC (Error Correction Code) for data integrity
  • Industrial-grade temperature range
  • Wide Compatibility: Works with standard SPI controllers

This flash memory is commonly used in consumer electronics, IoT devices, networking equipment, and embedded systems requiring reliable non-volatile storage.

*(Note: Always refer to the latest datasheet from Winbond for updated specifications.)*

Request Quotation

Part Number:
Quantity:
Target Price($USD):
Email:
Contact Person:
Additional Part Number
Quantity (Additional)
Special Requirements
Verification: =

Recommended Products

  • W91314 ,103,DIP18

    Manu Datasheet does not contain specific information about the part **W91314** manufactured by **WINBOND**.

  • WR91710 ,4962,SOP-20

    Manufacturer:** WINBOND **Part Number:** WR91710 ### **Descriptions and Features:** - **Type:** Non-volatile Serial Flash Memory - **Interface:** SPI (Serial Peripheral Interface) - **Memory Capacity:** 1Mbit (128KB) - **Operating Voltage:

  • W25Q64FVZPIQT ,4397,

    W25Q64FVZPIQT is a serial flash memory device manufactured by Winbond.

  • TDA9116,ST,83,DIP32

    MB446,FUJ,83,DIP16

Sales Support

Our sales team is ready to assist with:

  • Fast quotation
  • Price Discount
  • Technical specifications
Contact sales